Видео

💯👍🤝

What a relief not hearing crappie music And you did a good job of your video Just wished there was a little more detail in the actual cut or finished product

I like you

I cant understand the mecanism

Where is your gloves????

Always cool vidéos, I like your job.👍😉

I prefer a faster feed with a shallower depth of cut. Same mmr with safer small chips.

Thank you for the demonstration. I'm retired (many years ago) but I think that with that profile of insert, the shavings should be curling off in a long line..or even breaking off in short lengths. The feed rate is too slow for that to happen.

Merci pour vos vidéos toujours intéressantes .

Thank you for demonstrating this insert! Your testing is helpful!

Wow ! That was some big cuts !

Beautiful! I love those inserts!

Excellent demonstration. Looks to be a nice finish, in roughing out. As bobprice9924 mentioned, stringer/ ribbons or "Razor Wire" - not if I can make chips (9s), shinny coming off and instantly turning blue. Sorry, I have to say this....if you ever get a big bird nest of razor wire under the chuck and suddenly thrown into your face, you will understand (lesson learned over 20 yrs ago). Sort rant...manual machinist, worked both job shop and manufacturing, when I have spare time - home machining also. For roughing I like the cnmp 432 insert. I've taken as much as .300 roughing cut in easier machining metal, i.e. 12L14, Stressproof and 4140. Worst job I have ever had, 4 shafts - 2 bearing journals - total tolerance was .0002 - no file, no sand paper - "Turned". Got 'em done, clocked out, went to the 7-11, one 6 pack - 3 packs of smoke, gone in less than 20 min, clocked back in and the boss was laughing. Keep up the good show and tell.

The only reason anyone would be surprised over this is would be because you made it. It's a FuC<ing jackstand. Give back the donated tools and stick to the walker

Hola Sergey, que buen torno tienes! Las plaquitas son de AliExpress? Gracias!

I'm a hobby machinist. I use ccmt09t304 inserts. I like to get things done quickly on the lathe at work so I usually start with a .250 depth of cut. I get blue chips. I hate the ribbons. I was told by an old machinist that the chips should never be blue, but I don't care.

Melhor performance = Velocidade de corte, Profundidade de corte e Avanço "Adequados" para a pastilha e material a ser trabalhado. O ideal é que os cavacos sejam todos quebrados. 👍

cool

👍👍👍👍

Good❤❤❤

👍👍👍

excellent job my friend!

GOOD.

Put him an electric motor electric bike

Very very good

Simple and beautiful😊

thks

Senza r freni?

Can’t see what you’ve achieved?

What was the point of that

Nice prof. job well done

Hello, you could buy the pair for 14€ (from china for sure) and give your machining time to more sofisticated project. Regards

10/10 again mate!

Nice job! I still have the pair I made in high school in 1971.

Very nice jack stand 😇🙏

Ya that's a good one 👍

Hi. When I watch your vids and see your great ideas and the way you work I'm wondering, why the channel had only 13500 subscribers. Greetings !

MASHA.ALLAH

MASHA.ALLAH.GOOD.WERK

Muito bom trabalho e muito útil.

very good！

O apoio no veículo deve ter alguma trava em V ou U para evitar escorregamento. Tenha cuidado...✋️

Excellent work, very useful 👍

Good idea my friend❤❤❤

Desde cuba abraso grande y vendiciones

👌

I’ve only been doing this for 50 years, but if I’m working to a very fine tolerance, +or- 0.0001” , or thereabouts, I find it much quicker to rough turn to plus 0.010” and cylindrically grind, inside and out.

Good job Guy ;oP

Molodyets Sergey. Do you know if you would get acceptable results with positive top rake WNMG inserts on a small lathe?

So now we know that carbide inserts will cut metal.